How Much Would You Pay to Seal an Asphalt Driveway?

If you want to prolong the lifespan of your driveway, the best thing you can ever do is to add a blacktop sealcoat. While you can do this yourself if you have the skill, the best approach is to hire a professional to do it for you. You can sealcoat your driveway annually or once every few years if you want it to look attractive.

What Driveway Sealing Entails

Asphalt driveway sealer is layered on top of the driveway and this makes it act as a barrier preventing car fluids, ice, water, the scotching sun, and chemicals from staining or eating away the driveway surface.

The frequency with which you should apply the driveway seal is primarily determined by your location. In climates characterized by cold and harsh winters with lots of freeze-thaw cycles, driveways should be sealed at least once per year or after two years. People living in mulch molder climates should undertake driveway sealing at least once every 4 years.

The Cost of Sealing a Driveway

According to research on the average prices for sealing driveways, it costs between $200 and $500, but it could even be more depending on your special circumstances and considerations. Some contractors use square foot as a unit of charge for materials which is about 38 cents. Using this rate, doing a driveway that is 500 square feet will cost you $190 in materials only. Thereafter, you have to factor in the cost of installation which now takes us to the range of $200 to $500.

Hiring an asphalt sealcoating company ensures you that your job will be done to the excellence you expect. The professionals have the experience to handle every aspect of the job and give you a clean finished job at the end of the day.

Driveway installers understand the kind of products that do well in your area and the sealers to avoid. They also have the knowhow to ensure the blacktop sealcoat doesn’t pull accidentally and can even advise you on the frequency with which to reseal your driveways.

All in all, the benefits of getting your project handled by professionals outweighs by far the savings generated through the DIY approach. There are lots of hidden costs such as eventual driveway damage and the need to reseal your driveway more often than normal if you do the job yourself.

Don’t compromise on the quality of your driveway sealing, hire experienced and skilled experts to do it right the first time.

Source: Asphalt Seal Coat of Rockford

Top 4 Methods You Can Dispose Your Waste

The world today and more so the industrialized nations are grappling with the issue of expeditious disposal of waste. We all know that toxic and non-biodegradable wastes such as radioactive remnants can cause tremendous and irreparable damage not just to the environment, but also human health if not safely disposed of.

For several decades, waste disposal has been a central concern and thanks to the massive population growth and industrialization efforts, waste generation and disposal is becoming a nightmare.

Some advancement has been made, but more still needs to be done if this problem is to be contained. The greatest challenge faced by policy makers and those at the center of innovations is in finding newer and non-hazardous waste disposal methods they can use. Below are some of the waste disposal techniques you can practice even at home.


Through recycling, you can transform waste into various products by way of industrial processing. Aluminum, glass, plastics, and paper are some of the commonly recycled wastes. Reusing waste instead of throwing it away is an environmentally friendly practice which is encouraged globally.

Less energy is used in the conversion of waste into finished products and that means people can end up with the same products, but having cost much less to produce. Your contribution to recycling is to ensure that recyclable wastes are carefully sorted and taken to the designated points of collection.


This is also an exciting process where waste is incinerated with the aim of transforming it into base components. The heat generated in the process is carefully trapped and used for deriving energy. The common byproducts of the incineration process are inert ash and assorted gases.

Depending on the nature of waste being burned and the design of the incinerator, there can be varying degrees of pollution. In modern incinerator designs, pollution is checked by using filters. The ash from the incineration process of organic wastes can be used in facilitating hydroponic solutions.


This method of waste disposal brings into the equation microbes which discompose the organic waste. The waste accumulates over a long time thereby giving space and time for the microbes to work on it. This process is somewhat slow, but it can be useful in improving soil fertility.

Sanitary Landfill

This is quite simple because all you need to do is to dump the waste into a landfill. The landfill base is lined with a protective material which acts as a barrier between groundwater and the waste. This separates the toxic chemicals from the waste and prevents it from contaminating the water zone.

While there is need for concerted efforts in waste disposal, you can start in your own small ways to contribute to this bigger agenda on waste disposal.



The Top 4 Enemies of Your Roof You Need to Avoid

You may know that your roof requires regular repair or even replacement and your gutters cleaned, but you may have no idea why these are very important until the evidence gets into your Rockford home. It is critical to understand who are the enemies of your roof and how you can get rid of them as a way of avoiding costly repairs.

Debris and Branches

Tree branches and debris can hurt your roof in several ways amongst them:

  • Scraping your roof – This is particularly the case with branches that are hanging low. They can scrape away your roof shingles thereby wearing it down.
  • Mold growth – Debris and dead branches can create an opportunity for mold to grow on your roof.
  • Leaves – If you have a dump load of leaves somewhere in your gutters, it can create water backup thereby causing mold to grow on your roof.

Moss and Algae

Many homeowners confuse moss and algae with mold or mildew. This is why you need to contact a Rockford, IL roofing expert to help you differentiate the two. Algae readily forms where there is moisture on your roof surface. Although it is not considered physically damaging, it can destroy the look of your roof if left unattended.

Moss on the other hand tends to grow on roof planes that are north facing. Overhanging branches can hugely encourage the growth of moss because they supply shade and debris hat locks in the moisture. Moss is destructive to shingles and it causes them to curl and lift.


Squirrels, birds, rats, bats, racoons, and even mice often build their nests in roofs and attics. For them to gain access to your attic, they tear the surrounding material until they create a hole that is being enough for them to enter. They can also bore through rotting wood. This destroys your roofing system and creates openings through which water can enter and destroy the shingling and wood.

Snow and Ice

Houses that are not properly insulated are vulnerable to snow and ice. When warm air from inside your house hits the snow that is sitting on your roof and this causes it to melt. The result is that water trickles down between the layers of shingles and snow until it reaches the eves. This ultimately leads to ice dams.

Apart from the above, you use need to be on the lookout for shingle wear and tear, clogged gutters, and condensation. Engaging the services of a Rockford professional can go a long way in safeguarding your roof against these enemies.


Horsepower or Torque – What Counts in Towing?

There has been a debate in the towing industry as to what counts between horsepower and torque when it comes to towing. Simply defined, horsepower is the measurement of work done. This means force applied to an object which then moves a certain distance in the direction of the force. In terms of figures, one horsepower measures up to the energy required to move a 149 kg object over a distance of 30.5 meters in a single minute.

Torque on the other hand refers to the twisting force that spins an object such as a wheel. As opposed to horsepower, torque can be exerted even if the object does not move. The measurement of torque is in pounds-feet.

Measurement of Horsepower

For you to be able to measure horsepower, you must first measure torque. To put it in layman’s terms, torque measures the magnitude of work done while horsepower measures the speed with which the speed is done.

Torque moves a vehicle from a stop position and helps it to climb even the steepest of hills. For this reason, more torque is needed if you are to start a heavier vehicle compared to a lighter one. In summary, torque is what allows you to drag heavy loads when towing.

When watching car advertisements, horsepower is often mentioned when discussing racing cars performance. However, in truck commercials, you will most likely hear torque being discussed.

The Towing Capacity of a Truck

When assessing towing capacity of a truck, you need to look at the amount of wait the truck can pull. Most modern trucks can pull up to 7257.5 kg which in certain cases amounts to more than double their weight.

There is a relationship between the torque of a truck engine and its towing capacity. The tow truck’s engine normally creates torque which it then uses to turn the crank shaft that ultimately connects the transmission. Using gears, the transmission converts the torque to enable the truck tow your vehicle safely.

If you are observant enough, you will realize that most tow trucks operate on lower gears. This is because these gears have more torque available.

The role of horsepower is to help your truck accelerate and get the job done faster. The ability to pull (torque) is not enough on its own because you need to get to a destination and horsepower will enable you to do so.

It’s therefore important to tell the difference between the two so that when choosing a tow truck in Rockford, you won’t be misled into concentrating only on horsepower at the expense of torque.